| PRODUCTS <1> <2> <3> <4> <5> <6> <7> <8> <9> <10> |
| CD Aluminum Electrolytic Capacitor |
1.Usage and festures
The product adapts to single-phase asynchronous motor and three-phase asynchronous motor,which is supplies with single-phase power and the frequecy is blew 100Hz.It is specially used for supplying leading current for elecrtomtor,and then the electromotor is actuated with the adeqate moment consequently.And when the electromotor runs smoothly,the capacitor will disconnect from the circuit.The product possesses stable capacity and long relative runtime.
2.Service condition
2.1Altitude:The installing and running area should below 2000 meters.
2.2Temperature:The service temperature of capacitor is-25~+55℃；-10+70℃
2.3Humidity:21d.
2.4Dirtiness:The installing and running area should belevel1 dirtiness area.
2.5The residual voltage in service:Under 10% of rated voltage.
3.Technical indicators
3.1Rated voltage:16~500V。
3.2rated frequency:50/60Hz。
3.3Insulation:Between terminal:1.2Un,2seconds;none are over.Between pole and shell:2KV,2seconds;none are over.
3.4Capacity range:20~1000μF
3.5Capacitor deviation:±20%（±10%±15%）。
3.6Tangent of loss angle:Less than 0.15
3.7Outletline:The section area is greater than 0.5mm .
3.8Operation mode:Intermittent operation
3.9Standard:Complied with GB/T8596-1997.
|
CD Aluminum Electrolytic Capacitor |
  |
Features of CD60
1.Small size big capacity,and stable running
2.Quite small leakage current,small capacity change,and credible security.
3.Single product could be made to very big capacity,and the usable range is more extensive.
|
Dimensions of CD60 Series
序号 |
额定电压(v) |
额定容量 ( μ F) |
外壳尺寸(D×H)mm |
NO. |
RateVoltage(v) |
Rated capacity( μ F) |
Dimensions D×Hmm |
1 |
120
|
300 |
42×80 |
2 |
400 |
42×80 |
3 |
500 |
50×100 |
4 |
800 |
55×120 |
5 |
1000 |
60×120 |
6 |
250 |
60,75 |
34×80 |
7 |
100,150 |
34×80，42×80 |
8 |
200,250 |
42×80 |
9 |
100,150,200,250 |
50×100 |
10 |
300,350,400,500 |
50×100 |
11 |
300 |
600 |
50×100 |
12 |
250 |
150,200,300 |
50×95(单线) |
|
Note:We could design and manufac ture as customers'specified specs and dimensions.
|
